Cortubing CTM-2 high precision cutting machine

faqs

What is the maximum cutting diameter that the Cortubing cutting machine allows?

Does the Cortubing cutting machine allow me to cut any stainless steel alloy?

What percentage of coolant should be added to the water in the Cortubing cutting machine?

How much can I cut with Cortubing cutting machine’s length precision regulator?

Can bezel be cut with the Cortubing cutting machine?

Can the Cortubing cutting machine cut solids?

Can I cut several tubes at the same time with the Cortubing cutting machine?

How do I know that the Cortubing cutting machine’s disk has finished?

What type of materials can I cut with the Cortubing cutting machine?

For any doubts related to the Cortubing tube and bar cutting machine, the following shows a list of the most frequent queries. If you don’t find the a

FAQ’s

For any doubts related to the Cortubing tube and bar cutting machine, the following shows a list of the most frequent queries. If you don’t find the answer to your doubt, please contact us

For any doubts related to the Cortubing tube and bar cutting machine, the following shows a list of the most frequent queries. If you don’t find the a

No, the Cortubing cutting machine allows you to cut any shape or profile provided it does not surpass the clamp opening.

 

What type of materials can I cut with the Cortubing cutting machine?

With the Cortubing cutting machine you can cut: All ferrous and non-ferrous materials. There are specific disks for each material and three types of generic disks that can be used for all the materials. See disks

How do I know that the Cortubing cutting machine’s disk has finished?

The operator will notice that the cutting disk of the Cortubing cutting machine does not finish cutting the tube

A worn cutting disk measures, from its centre to the edge, some 46,5 mm

 

Can I cut several tubes at the same time with the Cortubing cutting machine?

Yes, provided the clamp opening of the Cortubing cutting machine is not surpassed.

Can the Cortubing cutting machine cut solids?

Yes, the greater the number of bars or the greater the diameter of the solid bar, the slower the cut will be with the Cortubing cutting machine.

Can bezel be cut with the Cortubing cutting machine?

The Cortubing cutting machine, with its present design, does not allow for bezel cutting.

How much can I cut with Cortubing cutting machine’s length precision regulator?

With the Cortubing cutting machine regulator you can cut to a maximum of 110 mm

If you need to cut longer you can remove the precision regulator thanks to its easy detachability (2 screws x regulator)

What percentage of coolant should be added to the water in the Cortubing cutting machine?

The percentage of diluted coolant in the water of the cutting machine must be 3%

 

Does the Cortubing cutting machine allow me to cut any stainless steel alloy?

Indeed, the Cortubing cutting machine cuts stainless steel tubes and bars with different alloys; 304, 316 etc..

What is the maximum cutting diameter that the Cortubing cutting machine allows?

The Cortubing cutting machines allows you to cut the following metallic tubes and bars:

 

squared : from 0 to 15 mm

round : from 0 to 22 mm

rectangular : 5 x 20 mm